Painting Enamels

Hi Wayne,

You asked about making flesh colors. This hula lady is an enameling technique of cloisonne. This mean the wires are forming the figure. Inside the wires I used Bovano’s flux #3 on fine silver, then the following layer are 209 Bovano’s. It is a opal enamel and you have the be careful not to over fire it, too hot too long or gets muddy. When finished and polished it should look like it is transparent enamel, that is the color of flesh.

Alohi Lani Designs, cloisonne jewelry

 

Below is a color plate of mine of opaque flesh colors from left to right, the lower row.

Bovano =B

B157 is a soft enamel, B88 hard enamel, B220, B226, B224, B233, B227 With these opaque enamels you could make figurative work.

Flesh-Colors-003Flesh-Colors-003IMG_0132

 

Below is a figure  jewel is by Larissa Podgoretz. She uses painting enamels. You can get a kit from Thompson. The way she accomplished the look of flesh is to start with a plate of copper.  And apply and fire a hard white opaque enamel such as Thompson’s 1010, or Bovano’s 101. A hard enamel is used so the foundation is harder than you color layers, this assures the layers of colors will not sink into foundation and look washed out. As their pigment is very thin.

Once you have this base coat of the hard firing white enamel, you sand and polish it to make a smooth canvas to paint on. Now you would take the painting kit and mix colors to get the shades you are imaging.   As if you were doing an oil painting.

As you fire many layers of color you do loose a little intensity of the colors, so the last layers will be the darkest.

Flesh-Colors-006Flesh-Colors-006IMG_0136

The photo below is one I have started and you can see how you start painting. First I am paint an outline of the lady. And I fired it. Then I start adding my background color, and fire it. The colors you want to be more subdue  you apply first as they fade into the base enamel a bit.The later color applied will be more intense. With painting enamels you can mix them together, say brown and white with a little orange to get a flesh color. It is something you have to play with and learn how to make colors. Any painter using water colors or oils or acrylics have to learn what to mix to get the shade they desire.

To apply the painting enamels you have to play also with them to see how you like the effects of the medium to mix them with.  You choose water or oil. I prefer oil. Once you get the kit I recommend you order the enameled steel tiles and mix colors and fire them just like any test plate to see what you like or don’t. And the same theory applies to these enamels as all others, reds and yellows burn. So you will be applying them toward the end of you journey.

 

Flesh-Colors-004Flesh-Colors-010IMG_0140

Hope you can get the idea here, Good luck, Patsy

2 thoughts on “Painting Enamels

  1. Wayne Houston

    Hi Patsy,
    I have looked at your response post and don’t understand the relationship between your written response and the items in the picture. Would you explain that please? Thanks again.
    Wayne

    Reply
    1. Patsy Croft Post author

      Wayne, I have add more detail to the response under painting enamels topic page. Hope this helps you! Patsy

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *